Ericsson LBI-38732E - Manual (Page 21)

order, or to select a set (bank) of
groups for SYSTEM/GROUP/
CHANNEL knob selection (depend-
ing on programming). See SYSTEM/
GROUP/CHANNEL SELECTION
for details.
3 Toggles scan operation on and off.
When the radio is scanning,
is
on and all groups or channels in the
scan list of the currently selected
system are scanned.
6
9
Adds or deletes selected groups or
channels from the scan list of the cur-
rently selected system. See the
trunked and conventional scan sec-
tions for details.
7 The Status key is used to send a pre-
programmed status message to the
EDACS site.
8 The Message key is used to send a
pre-programmed status message to
the EDACS site.
* Used to place a telephone call
through the radio by selecting the
telephone interconnect special call
function. See Telephone Intercon-
nect Calls for details.
# Used to call an individual or make an
all-call by selecting the individual call
SCN
21