Ericsson EDACS LBI-39077 - Manual (Page 15)

GETTING STARTED LBI-39077
15
Figure 7 shows a sample Get/Verify menu screen with the Verify category selected. When this category is first selected, the
System config operation is automatically selected. Selecting another operation will change the information in the HELP
window.
EDACS GTI Configurator/Database Manager V1.3 (SUPERVISOR mode)
GET/VERIFY MENU: ì Entire Verify м
ЪДДДДДДДДДДДДДДДДД¿
³ System config ³
³ Telco config ³
³ DID numbers ³
АДДДДДДДДДДДДДДДДДЩ
ÉÍHELPÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÉÍSTATUSÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect item with arrow keys and ººRequesting unit type.... º
ºENTER or capital letter. ESC to quit ººConnected to GTI system! º
º ººReady to process commands º
ºVerify System Config allows the Systemºº º
ºConfiguration data to be compared to ºº º
ºthe selected system PC database. ºº º
ºA count of differences is noted. ºº º
ºData is not stored. ºº º
ИНННННННННННННННННННННННННННННННННННННН¼ИННННННННННННННННННННННННННННННННННННН¼
Still connected to System
Figure 7 - Sample Get/Verify Menu Screen with the Verify Category Selected
The Verify category of operations continues to require communication with a GTI unit in the system via a local or remote
data link, to send and/or receive information about the system’s configuration or performance. This category includes the
following specific operations:
•
The System config operation is used to verify just the system configuration data in the GTI database files against the
RAM contents of the GTI units in the selected system. If one or more discrepancies are found, the GTI Configurator
will notify you on the computer screen. No new database is created.
•
The Telco config operation is used to verify just the telco configuration data in the GTI database files against the
RAM contents of the GTI units in the selected system. If one or more discrepancies are found, the GTI Configurator
will notify you on the computer screen. No new database is created.
•
The DID numbers operation is used to verify just the DID number data in the GTI database files against the RAM
contents of the GTI units in the selected system. If one or more discrepancies are found, the GTI Configurator will
notify you on the computer screen. No new database is created.
Retrieve Billing
Use the Retrieve Billing operation to retrieve call detail billing data from the selected system. For more information, see the
BILLING FILES section later in this manual.