Ericsson EDACS LBI-39077 - Manual (Page 6)

LBI-39077 INSTALLATION
6
2. Insert either the 5-1/4" or 3-1/2" GTI Configurator software disk into an available floppy drive. For this procedure, it
has been assumed that drive A is used.
3. Type “A:” and press the Enter key. The characters A:\>_ should now be displayed on the next line of the screen.
4. Type “INSTALL” and press the Enter key.
5. The INSTALL program will prompt you to enter the path and name of the directory you wish to use for the GTI
Configurator software files. GTICON is the recommended directory name, but you may use whatever name suits
you. The INSTALL program will use the default path and name of C:\GTICON if you press the Enter key without
making a change. Follow the on-screen instructions. The INSTALL program will create the directory if it does not
exist, then copy the GTI Configurator software files to the directory. When the installation is complete, a message
will be displayed on the screen telling you that the installation is complete. Then press the Enter key, and
C:\GTICON>_ will be displayed on the screen.
6. Make sure the program runs by typing “GTICON”, pressing the Enter key, and waiting for the Main Menu screen to
appear (it may take a few moments).
7. Press the Esc key twice to exit the program.
UPGRADE INSTALLATION
If an earlier version of the GTI Configurator software has already been installed in your office PC, and you want to upgrade it
to a newer version of the software, use the following procedure:
CAUTION
DO NOT copy a newer version of GTI Configurator software directly into an old GTICON directory using the COPY
command. If this is done, user-entered data in the old GTICON directory will be lost.
1. Turn on the office PC being used as the GTI Configurator, and wait until the characters C:\>_ are displayed on the
screen. If the office PC is already on, exit any program that may be running, type “CD\”, and press the Enter key.
The characters C:\>_ should then be displayed on the next line of the screen.
2. Type “CD”, press the Space bar, type “GTICON” (or whatever other name was given to the directory where the GTI
Configurator software files were installed), and press the Enter key. The characters C:\GTICON>_ (or
C:\whatever>_) should then be displayed on the next line of the screen.
3. Type “GTICON”, press the Enter key, and wait until the Main Menu screen appears. (If passwords have been
assigned, you will need to enter your password in the password screen before the Main Menu screen appears.)
4. Select (highlight) the Retrieve Billing operation from the Comm group of operations in the Main Menu screen and
press the Enter key. Then follow the on-screen instructions to retrieve all current call detail records (if the
information is important to you).
5. Select (highlight) the Backup operation from the File group of operations in the Main Menu screen and press the
Enter key. Then follow the on-screen instructions to backup these call detail records to a floppy disk.
6. Press the Esc key two or more times until the characters C:\GTICON>_ (or C:\whatever>_) are displayed on the
screen.
7. Type “CD\” and press the Enter key. The characters C:\>_ should then be displayed on the next line of the screen.
8. Insert the new 5-1/4" or 3-1/2" GTI Configurator software disk into an available floppy drive (for this procedure, it
is assumed to be drive A).
9. Type “A:” and press the Enter key. The characters A:\>_ should then be displayed on the next line of the screen.
10. Type “INSTALL” and press the Enter key.
11. The INSTALL program will prompt you to enter the name of the directory for the GTI Configurator software. Enter
the name of the directory where the old GTI Configurator has been installed, and follow the on-screen instructions.
The INSTALL program will convert the old database .dat files into a format compatible with the new version of