Ericsson EDACS LBI-39077 - Manual (Page 45)

DATABASE LBI-39077
45
•
Tone Level - This field (for each prompt message) is used to define the loudness level of the message. Enter a
number from 1 to 7, where 7 is the loudest. (Default = 5)
•
Vc Tm - This field (for each prompt message) is used to define the number of seconds that you wish to allocate
for this voice prompt. Enter a number from 01 to 25. The total voice prompt time for messages 1 through 6
cannot exceed 30 seconds. (Default = 05)
NOTE
Voice prompts must also be enabled on a per-line basis before voice prompts will be played. See the Voice Prompts: field in
the telco configuration screen.
•
Edit Dial Plan Table - This field is used to define a dial plan table to be used in radio-initiated, multi-frequency
dialing applications to reduce dialing time. Enter C to edit the dial plan, enter D to select the default North American
dial plan, or enter N to disable the dial plan. The number being dialed is compared to the dial plan table. As soon as
a match is found, the number will start to be dialed without waiting for all the digits. (Default = N) If you enter a C, a
DP_CUST pop-up window will appear displaying ten 16-digit telephone number fields. Fill one or more fields with
any combination of the following characters:
•
0 through 9 = allowed digits
•
A = 0 or 1 only
•
X = all values from 0 to 9
•
M = all values from 1 to 9
•
N = all values from 2 to 9
•
Enable Auto Retrieve Billing: - This field is used to define whether you want this system to be included in an
automatic download of call detail billing information. Enter Y for yes; N for no. An IAM must be present in this
system to use this feature. (Default = N) If you enter a Y, an AUTO_RTRV pop-up window will appear displaying
the following additional fields:
•
Number of Entries: - This two-character field is used to define how many extra times the system will be called
if the first time the call retrieval failed due to either a busy line or communications failure during call detail
retrieval. Enter a number from 00 to 10. (Default = 04)
•
Internal Modem Autodial Delay: - This two-character field is used to define the overdial delay in seconds for
internal modem in originate mode. Enter a number from 00 to 20. (Default = 08)
•
Create Date - This 8-character field is used to define when the system record was first made. It is automatically
filled in with the current date when the system record is first made, but can be manually changed if necessary.
(Default = blank)
•
Alter Date - This 8-character field is used to define when the system record was last changed. It is automatically
filled in with the current date whenever the system record is changed, but can be manually changed if necessary.
(Default = blank)
When you have finished configuring a system for the first time, or after reconfiguring one or more parameters for a previously
configured system, press the F10 key to save the record. You may continue to enter new records for systems or change
existing ones. When the system records are configured the way you want them, press ESC key twice to return the Main Menu
screen.
TELCO INFORMATION
Telco information is information about the individual telephone lines connected to the GTI units in the system. To edit the
telco information, select the Telco config operation from the Edit group in the Main Menu screen, and press the Enter key.
Then select the system you want to edit from the INDEX window in the next screen, and press the Enter key. The next screen