Ericsson EDACS LBI-39077 - Manual (Page 21)

GETTING STARTED LBI-39077
21
Figure 14 shows a sample Other menu screen with the Reset category selected. When this category is first selected, the Units,
soft operation is automatically selected. Selecting another operation will change the information in the HELP window.
EDACS GTI Configurator/Database Manager V1.3 (SUPERVISOR mode)
OTHER MENU: ì Set Clear Reset View м
ЪДДДДДДДДДДДДДД¿
³ Units, soft ³
³ Units, hard ³
АДДДДДДДДДДДДДДЩ
ÉÍHELPÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÉÍSTATUSÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect item with arrow keys and ºº º
ºENTER or capital letter. ESC to quit ººConnecting to system.... º
º ººRequesting unit type.... º
ºReset units, soft attempts to reset ººConnected to GTI system! º
ºall units at the system. Caution: If ººReady to process commands º
ºthe units have not been properly ºº º
ºconfigured or connected, there is no ºº º
ºguarantee that all units will reset. ºº º
ИНННННННННННННННННННННННННННННННННННННН¼ИННННННННННННННННННННННННННННННННННННН¼
Still connected to System
Figure 14 - Sample Other Menu Screen with the Reset category selected
The Reset category of operations continues to require communication with a GTI unit in the system via a local or remote data
link, to send and/or receive information about the system’s configuration or performance. This category includes the
following specific operations:
•
The Units, soft operation is used to reset all the GTI units in the system.
•
The Units, hard operation is used to reset and clear all the GTI units in the system.