Ericsson EDACS LBI-39077 - Manual (Page 25)

GETTING STARTED LBI-39077
25
Restore
WARNING
Restoring previous data to the GTI Configurator database files will overwrite current data in those files. If you do not want to
lose the current data, make a backup. Previous configuration data from one version (revision) of GTI Configurator software
cannot be used to restore configuration data to another version (revision) of GTI Configurator software.
Use the Restore operation to restore previous data to the GTI Configurator database files from backup diskette(s). Figure 18
shows a sample Backup menu screen having the single Data type category. When this category is first shown, the
Configuration data operation is automatically selected. Selecting another operation will change the information in the HELP
window.
EDACS GTI Configurator/Database Manager V1.3 (SUPERVISOR mode)
RESTORE MENU: ì Data type м
ЪДДДДДДДДДДДДДДДДДДДД¿
³ Configuration data ³
³ call Detail ³
АДДДДДДДДДДДДДДДДДДДДЩ
ÉÍHELPÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect item with arrow keys and º
ºENTER or capital letter. ESC to quit º
º º
ºRestore Configuration Data, restores º
ºfrom diskette(s) all Configuration º
ºdata - º
ºWarning - old data in the current dir.º
ºwill be overwritten (destroyed). º
ИНННННННННННННННННННННННННННННННННННННН¼
Figure 18 - Restore Menu Screen with Configuration data Selected
The Restore category of operations includes the following specific operations:
•
The Configuration data operation restores from diskette(s) all Configuration data. (Warning: old data in the current
directory will be overwritten.)
•
The call Detail operation restores from diskette(s) Call Detail Files for all systems. (Warning: old data in the current
directory will be overwritten.)
After you have selected (highlighted) one data type from the Restore menu, press the Enter key. The next screen prompts you
to specify the floppy drive you will use. Insert the backup diskette into a floppy drive, type the letter of the drive, and press
the Enter key. If the backup GTI Configurator data is on more than one diskette, start with the first diskette and follow the on
screen instructions. Make sure to insert the correct set of backups (if you have more than one set), and in the correct order.
Before you insert each backup diskette into the computer, check to make sure it is "write protected" (black label covering the
notch on 5-1/4" media; shutter open on 3-1/2" media).