Ericsson EDACS LBI-39077 - Manual (Page 23)

GETTING STARTED LBI-39077
23
Print
Use the Print operation to select which type of GTI Configurator database file you want printed. Figure 16 shows a sample
Print menu screen having the single By type category. When this category is first shown, the System config operation is
automatically selected. Selecting another operation will change the information in the HELP window.
EDACS GTI Configurator/Database Manager V1.3 (SUPERVISOR mode)
PRINT MENU: ì By Type м
ЪДДДДДДДДДДДДДДД¿
³ System config ³
³ Telco config ³
³ DID numbers ³
АДДДДДДДДДДДДДДДЩ
ÉÍHELPÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect item with arrow keys and º
ºENTER or capital letter. ESC to quit º
º º
ºPrint System Config allows the System º
ºConfiguration data to be printed. º
º º
º º
º º
ИНННННННННННННННННННННННННННННННННННННН¼
Figure 16 - Print Menu Screen with System config Selected
The Print category of operations includes the following specific operations:
•
The System config operation prints the System Configuration files for all systems.
•
The Telco config operation prints the Telco Configuration files for all systems.
•
The DID numbers operation prints the DID Numbers files for all systems.
After you have selected (highlighted) one type of GTI Configurator database file from the Print menu, press the Enter key.
The next screen allows you to arrange the file by any parameter in the file. After you have selected the arrangement, press the
Enter key to print the arranged file to a printer connected to the GTI Configurator, or save to a disk file.
Backup
It is very important that you periodically save a copy of your subscriber database on floppy diskettes. If your hard disk has
trouble, or if you accidentally delete one of the GTI Configurator files, or if some other disaster occurs, you will be very
happy to have a recent copy of the database. We recommend that you do this each time changes are made, but not more than
once a day.