Henny Penny CLIMAPLUS LCG - Manual (Page 15)

14
Capabilities
ClimaPlus works by constantly monitoring and controlling the level of humidity
in the cooking environment. Most foods release moisture into the air as they
cook, naturally building excess humidity in the cabinet. When humidity rises above
the set level, ClimaPlus removes excess moisture. When humidity drops below the
set level, ClimaPlus signals the steam generator to add moisture into the cabinet .
The ClimaPlus window and controls are designed to display important information
about the cooking climate at a glance:
■ When cooking in Combination Mode, the horizontal display lights
up as a bar that is part blue and part red, with blue representing
moist heat and red representing dry heat.
■ The amount of blue and red showing indicates the desired
combination of moist and dry heat as set by the Central Dial.
■ The small green number displayed above the red/blue bar is the
actual percentage of relative humidity in the cabinet.
■ The ClimaPlus arrow key is used to activate ClimaPlus Control. During operation,
the arrows light up to indicate ClimaPlus activity. The up arrow lights up to
indicate that steam is being added to the cabinet. The down arrow lights up
when humidity is being removed from the cabinet.
Operation
■ Select Dry Heat or Combination Mode.
NOTE: Steam Generator is not active in Dry Heat mode. Therefore, ClimaPlus
functionality is limited to removing humidity from the cabinet. Moisture from
food may continue to build during cooking process but cannot be increased by
ClimaPlus.
■ Press the ClimaPlus Control arrow key.
■ Use the Central Dial to set the desired humidity level.
To check the current humidity level:
■ Press and hold TEMPERATURE key. The current humidity level in the cooking
cabinet is displayed in the ClimaPlus window.
GENERAL
INFORMATION
ClimaPlus Control
continued