Henny Penny CLIMAPLUS LCG - Manual (Page 29)

CONT-RUN
CONT-RUN
28
■ Create a custom cooking program with Rethermalizing settings that can be used
for similar recurring situations.
■ Use ClimaPlus Control to “fine tune” Rethermalizing to achieve desired results.
Operation and settings
■ Turn unit on.
■ Press Moist Heat and Dry Heat keys at the same time to set on COMBINATION
mode.
■ Set TIMER on Continuous Run.
■ Preheat to desired temperature.
■ Load oven.
■ Set desired Rethermalizing TEMPERATURE using Central Dial.
■ Select TIMER key. Set desired cooking time using Central Dial OR select
Continuous Run. Select IQT Sensor and set desired probe “done” temperature
using Central Dial.
■ Adjust ClimaPlus Control setting to achieve desired humidity level, generally
60% humidity or below, by pressing the control arrow key. Set desired humidity
level with the Central Dial
■ Unload oven when done. Unit automatically shuts off when door is opened.
NOTE: LCS & LCG models 20 & 40 have a built-in safety latch that lets steam
and heat out before door fully opens. Safety latch is optional on models 6, 10 and
1020. If your ClimaPlus Combi is NOT equipped with this feature, open door
slightly until fan stops and steam dissipates. Open door fully to unload.
COOKING MODES
Rethermalizing
continued
X
Opening Door During Operation
Open door slightly to allow hot steam and/or vapors to escape. KEEP FACE AND
HANDS AWAY FROM OPENING or burns could result. When steam and/or heat
has dissipated open door fully with care. Escaping hot steam and/or vapors can cause
serious burns. Interior surfaces, including pans, grids and oven racks, can be extremely
hot. To prevent burns, allow unit to cool or use appropriate heat resistant protective
mitt or pad when handling. Do not use built-in retractable hand shower when cabinet
temperature is above 212°F (100°C) or burns could result.