Naming programs, Working with programs to run a saved program, Cooking functions programming – Henny Penny CLIMAPLUS LCG User Manual
Page 46
45
PROG
START
PROG
START
12
P2
PI
12
PIE A
PIE A
PROG
START
PROG
START
PIE A
PROG
START
PROG
START
Naming programs:
You may wish to name programs in order to identify them faster and more reliably.
Names can contain up to eight characters.
■
Press the PROG/START key. The display shows the current program number.
Select the desired program number using the Central Dial.
■
Press and hold the IQT key until the cursor flashes under the first digit position
in the display. The Central Dial will now run through all alphanumeric characters.
Select the first character of the program name and press IQT key to confirm.
The cursor then flashes in the next position to the right.
■
Continue selecting letters and/or numbers in this manner.
■
To save the name, press and hold IQT key until the underscore disappears.
Programs are stored by name or by number. Named programs will be stored in
alphabetical order and will appear first in the display, followed by the numeric dis-
play. Named programs are no longer associated with program numbers. Program
numbers which have been given names no longer appear in the numeric display.
Tip:
■
If you use the same name more than once, ClimaPlus will index them by number.
■
Always enter letters of name before any numbers you may wish to include, e.g.,
Chicken 1, Chicken 2, etc.
Working with programs
To run a saved program
■
Turn unit on.
■
Press the PROG/START key and select the desired program using the
Central Dial.
■
Press the PROG/START key again to begin the program.
■
Once all cooking steps have completed, signal will sound and unit will shut
down automatically.
To make changes to a saved program
■
Press the PROG/START key and select the desired program using the
Central Dial.
■
Press PROG/START until the step you wish to change changed is displayed.
■
Make desired changes by selecting new mode, temperatures, time and/or any
additional functions.
■
To save changes press and hold the TEMPERATURE and PROG/START
keys simultaneously until the program number or name begins flashing. This
confirms that changes have been saved.
COOKING
FUNCTIONS
Programming
continued