Henny Penny CLIMAPLUS LCG - Manual (Page 44)

43
Programming
Programming capabilities of the ClimaPlus Combi allow operators to:
■ Create custom cooking programs
■ Incorporate IQT functions into custom programs
■ Lock/Unlock programs
If you are not already familiar with the LCS control panel, please review page 8
before attempting to program your unit.
Capabilities
Memory
■ Up to 99 total cooking programs are available to the operator. Up to 9 steps
(sets of parameters) are available for each cooking program.
■ An additional 11 programs have been pre-set at the factory (see Preset Program
Library, page 39.) These include 10 programs for common menu items as well
as a cleaning program.
■ ClimaPlus Combis also feature 3 IQT Logic programs (See +Profile Cooking,
+Low-T Cooking, and +Delta-T Cooking, page 37.)
Control
■ Automatic–Unit begins operation when PROG/START key is pressed.
Unit shuts down when last program step has been completed.
■ Manual Override–Program operation can be interrupted at any time by simply
selecting or setting a new value or special function. The new value or function
affects the cooking process only in the step in which the program was overridden.
Overriding the program DOES NOT cancel it. When the new value or function
is achieved, and/or that step of the program is completed, program operation
continues with the next programmed step, or shuts down unit if program is
complete.
■ Program Lock–Cooking programs can be locked to prevent any unauthorized or
undesired changes to the programs. If programming is locked out, only stored
programs will be displayed.
COOKING
FUNCTIONS
PROG
START