Henny Penny CLIMAPLUS LCG User Manual

Page 27

Advertising
background image

CONT-RUN

CONT-RUN

26

Operation and settings

Turn unit on.

Press Moist Heat and Dry Heat keys at the same time to set on
COMBINATION mode.

Set TIMER on Continuous Run.

A bar that is mostly blue and partly red appears in ClimaPlus window, indicating
that the ClimaPlus Control is set at 90% humidity.

Preheat to desired temperature.

Load oven.

Set desired cooking TEMPERATURE using Central Dial.

Select TIMER key. Set desired cooking time using Central Dial OR set for
Continuous Run. Select IQT Sensor and set desired core temperature using
Central Dial.

To change ClimaPlus Control setting, press the control arrow key and set the
desired humidity level with the Central Dial.

Unload oven when done. Unit automatically shuts off when door is opened.

NOTE: LCS & LCG models 20 & 40 have a built-in safety latch that lets steam
and heat out before door fully opens. Safety latch is optional on models 6, 10 and
1020. If your ClimaPlus Combi is NOT equipped with this feature, open door
slightly until fan stops and steam dissipates. Open door fully to unload.

COOKING MODES

Combination

continued

X

Opening Door During Operation
Open door slightly to allow hot steam and/or vapors to escape. KEEP FACE AND
HANDS AWAY FROM OPENING or burns could result. When steam and/or heat
has dissipated open door fully with care. Escaping hot steam and/or vapors can cause
serious burns. Interior surfaces, including pans, grids and oven racks, can be extremely
hot. To prevent burns, allow unit to cool or use appropriate heat resistant protective
mitt or pad when handling. Do not use built-in retractable hand shower when cabinet
temperature is above 212°F (100°C) or burns could result.

Advertising
This manual is related to the following products: