Honeywell HRSD16 - Manual (Page 111)

Operation
Document 800-00918 Rev F 111
02/08
Viewing Images from Covert Cameras
The only users who can view video from cameras set to Covert 1 or Covert 2 including
the camera titles and status icons are those users who have Covert Camera View
authority and who have logged into the system.
Spot Monitoring
When the Spot Monitor is in the sequence mode, you can set the camera's display dwell
time. See
Display Screen on page 66 in Chapter 3, Configuration for more details.
Selecting the Camera to Display on a Spot Monitor
1. On the front panel, press and hold SPOT for two seconds or longer.
The Sequence menu displays.
Figure 4-5 Sequence Menu
2. Select the camera to be displayed on the Spot Monitor.
OR
Select Sequence from the menu to sequentially display more than one camera on
a Spot Monitor.
3. Select Sequence again to stop sequencing on the Spot Monitor.
Note Any cameras that are Off, have lost video, or are set to Covert
(unless the user has authority to view covert cameras) are
excluded from the sequence.