Honeywell HRSD16 - Manual (Page 64)

Configuration
64
Figure 3-37 Audio Setup Screen
2. Highlight the field beside the input and press . A list of cameras appears, and
you can select which camera you want associated with that audio input.
3. Highlight Enable Audio-Out and press to toggle between enabling and
disabling the audio out feature.
Note The DVR does NOT record audio when the recording speed is
set to less than 1 ips.
4. Save your Audio changes by highlighting Save and pressing . Select Cancel
to exit the screen without saving the changes.
Alarm-Out Screen
The Alarm-Out screen allows you to change the settings and to establish a schedule for
each alarm output from the back of the DVR.
Highlight Alarm-Out in the Devices menu and press . The Alarm-Out screen
appears.