Honeywell HRSD16 - Manual (Page 89)

Configuration
Document 800-00918 Rev F 89
02/08
Figure 3-64 Video Loss Actions 1 Screen
Selecting a Camera or Cameras for Recording
You can set the DVR to start recording video from all the associated cameras if the DVR
detects video loss on the selected camera.
1. Highlight the desired field under the Record heading, and press . A list of
cameras appears.
2. Select the cameras that you want the DVR to record when video loss is detected.
If the DVR detects video loss on the selected camera, it starts recording video
from all the associated cameras.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen (see
page 71 ).
Setting Alarm-Out Actions
You can associate Alarm-Outs with a selected camera. When the DVR detects video
loss on the selected camera, it triggers output signals on the associated Alarm-Out
connectors. You can also have the DVR internal buzzer sound if video is lost on the
selected camera.
1. Highlight the desired field under the Alarm-Out heading, and press . A list of
Alarm Outputs appears.
2. Select the Alarm Output connectors that you would like to activate whenever the
DVR detects video loss on the selected camera.
3. Select OK and press to accept the changes.