Config tab, Config tab -5 – Hand Held Products 9500 User Manual

Page 107

Advertising
background image

Dolphin® 9500 Series User’s Guide

7 - 5

Config Tab

The Config tab provides a list of all access points (APs) and peer stations in range. You can create and edit SSID profiles for
access points that you want your station to associate with.

Preferred Profiles

This section displays a list of preferred profiles for APs in the network, created by the user, or added
from the Active SSIDs table. When turned on, the radio searches for the APs in the exact order shown
in the list of profiles. This section is blank after the initial installation and each hard reset. It will remain
blank if there no automatic association preference selected.

This section contains several icons that enable you to add and configure APs.

Active SSIDs

The Active SSIDs table lists all access points or peer stations (creator of IBSS) in the vicinity of the
host. It displays only those SSIDs that accept broadcast associations.

Each record displays information in the following six columns (The screen may not display all the
fields in the following table. Use horizontal scroll bar to view all):

Icon

Name

Description

New

This button is always active. Tap it to create a new profile on a series of
screens; for instructions, see

To Create a New Profile

on page

7-7.

The following buttons activate only when an Active SSID in the Preferred Profile list is selected.

Edit

Tap this button to open the configuration screens for the selected SSID.

Delete

Tap this button to delete the selected SSID from the Preferred Profile list.

Up

Tap this button to move the selected SSID up one place in the Preferred
Profile list.

Down

Tap this button to move the selected SSID down one place in the
Preferred Profile list.

Remember that the terminal accesses the SSIDs in this list in the exact
order that they appear; moving an SSID up or down in the list determines
the order of contact.

Column

This column displays…

SSID

The Network Name of the access point or peer station.

An icon with signal strength is also shown.

Signal

Strength in percentage for the selected SSID.

Mode

Access Point

Peer Station

Advertising