Hand Held Products 9500 - Manual (Page 256)

15 - 2 Dolphin® 9500 Series User’s Guide
Dolphin QuadCharger Parts and Functions
Top Panel
Charging Slots
The QuadCharger contains four charging slots. Each slot holds one Li-ion battery and charges it independently of
the other slots. When a battery is placed in each slot, it immediately begins charging.
Charge/Analyze Slot
This is the fourth slot and the only one that can be used to analyze a battery. When a battery is placed in this slot,
it begins charging just as it does in the other three slots. However, if you press the ANALYZE button, it runs the
battery in this slot through the complete Analyze cycle. For more information, see
Using the Battery Analyzer on
page 15-5.
Battery Capacity Indicator LEDs
These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For
more information, see
Battery Capacity Indicator LEDs on page 15-2.
Analyze Button
Press this button to start a battery analyze cycle; see Using the Battery Analyzer on page 15-5.
Status LEDs
A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the
batteries in its slot.
Status LED color This color indicates that the battery in the slot…
Green Has completed its charge cycle and is ready for use.
Orange Is being charged at a maximum charge rate.
Red Encountered an error during the most recent charge cycle.
Charging Slots
Status LED
Charge/Analyze Slot
Battery
Capacity
LEDs
Analyze
Button