Hand Held Products 9500 - Manual (Page 172)

9 - 2 Dolphin® 9500 Series User’s Guide
IM cards are obtained and activated by the network provider that supports your GSM/GPRS network.
On the Dolphin 9500 terminal, the SIM card door is located under the battery well, which enables easy access to the SIM card
while securing it under an installed battery.
To Install a SIM Card
The SIM card must be activated by the service provider prior to installation!
1. Turn off your terminal and lay it face-down on a flat surface.
2. Remove the battery pack; see To Remove the Main Battery Pack on page 2-7.
3. Unscrew the faceplate of the SIM card door. You must use a Torx T6 wrench. You can purchase this wrench from Hand
Held Products, part number 100001700.
4. Insert your SIM card. Make sure the interface on the card is connected to the SIM Card interface in the slot; the beveled
corner is in the upper right corner.
5. Place the SIM card door over the secured SIM card and fasten the screws.
6. Install the battery pack and turn on the terminal.
Using uPhone
The uPhone Application Suite contains three programs that function together to provide a complete voice, data, and text
messaging solution for a mobile device fitted with a radio modem:
Battery Well
SIM Card Door
Battery Interface
SIM Card Interface
Screws
SIM Card Door
SIM Card