Hand Held Products 9500 - Manual (Page 73)

Dolphin® 9500 Series User’s Guide 5 - 7
ClearType Tuner
Dolphin 9500 Series terminals displays support ClearType font rendering. ClearType is a Microsoft technology that increases the
readability of text on LCD displays.
After you enable ClearType font rendering in the Screen setting ( Screen , page 5-15), you can adjust the render level. Use the
slider to adjust the appearance of the sample type on the screen and tap OK.
For more information about ClearType font rendering, visit: www.microsoft.com/typography/cleartype/
what.htm?fname=%20&fsize=
Clock
This setting sets the system clock. Appointments, scheduled events, and any function on a schedule runs off this setting. You
need to set the time zone and time after each hard reset; see
Set the Time and Date on page 2-9.
CPU Speed
This system setting enables you to see and change the current speed of the Central Processing Unit (CPU).
The default is High Speed at 400MHz. Low Speed is 200MHz. To change the default, select Low Speed and tap OK. A message
appear confirming the changed and now current CPU speed.
Tap OK to save the change.
Memory
The Memory system setting enables you to review and manage both RAM (volatile) and IPSM/Storage Card (non-volatile)
memory. Dolphin 9500 Series terminals contain 64MB of on-board, volatile RAM memory. Open the Memory setting whenever
you receive system messages about memory.
There are three tabs: Main, Storage Card, and Running Programs.