Mounting the homebase, Desk mounting, Mounting the homebase -11 – Hand Held Products 9500 User Manual
Page 235: Desk mounting -11
Dolphin® 9500 Series User’s Guide
12 - 11
Mounting the HomeBase
Set the Dolphin HomeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide
enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the HomeBase.
When choosing a location, bear in mind that:
•
the mounting location must allow users easy access to the Auxiliary Battery Well, and
•
the serial and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access
to them in the future.
Desk Mounting
Dolphin charging/communication cradles have a DIN rail (7.5 X 35 mm) slot on the bottom to allow for secure desk attachment
of the unit if desired.
To mount the HomeBase, you slide the DIN rail slot along the bottom panel and secure it. Then, using the appropriate nuts and
bolts, secure the DIN rail to the desk or flat surface.
Auxiliary Battery Well
Serial and USB port location (not in view)
DIN Rail (7.5 X 35 mm)