Hand Held Products 9500 - Manual (Page 176)

9 - 6 Dolphin® 9500 Series User’s Guide
To Send a Call To a Dialed Number
You can:
• Tap the Send button .
• Press the ENTER key on the keyboard.
• Press the appropriate key combination on the keyboard - Keyboard Combinations for Calls , page 9-7.
When the call is connected, the three information lines display the following:
Network Operator Displays the name of the service provider you are using.
Name/Number Displays the name and/or number you called. If the number is from your Phonebook, that entry
displays.
Status The status of the call.
Idle - means no calls are incoming or outgoing.
In Call - means a phone call is in progress.
Incoming Call - means that a a call is coming in.
0:00 The numbers in the lower, right corner display the minutes:seconds that have elapsed.
Receiving a Call
When the Dialler screen is open and an incoming call is detected, text is displayed on the Dialler screen. If the Dialler is not visible
at the time of the incoming call, a Navigation Bar notification appears; see
Status Icons and Bubble Messages on page 9-3.
When a call is coming in, the ringtone sounds and the three information lines on the Dialler screen display the following:
Network Operator Displays the name of the service provider you are using.
Name/Number Displays the name and/or number calling in. If the number is in your Phonebook, that entry displays.
Status Incoming Call.
To Answer a Call
To answer a call, you can:
• Tap the Send button .
• Press the ENTER key on the keyboard.
• Press the appropriate key combination on the keyboard - Keyboard Combinations for Calls , page 9-7.
To Reject a Call
You can:
• Tap the End button .
• Press the appropriate key combination on the keyboard - Keyboard Combinations for Calls , page 9-7.
Joe Smith