Hand Held Products 9500 - Manual (Page 127)

Dolphin® 9500 Series User’s Guide 7 - 25
System Tab
The System Settings tab controls logging and the port manger timeout period.
Field Description
Log Level These settings control the detail of the log messages generated by the Client. Each level is
cumulative. By default, all errors, warnings, and information events are logged. Each entry
records a severity code (of one [debug message] to four [error] asterisks), a time stamp, and a
message.
Errors - only the most severe conditions are logged.
Warnings - less severe conditions are logged.
Information - all errors, warnings, and information events are logged. This is the default setting.
Debugging - creates a log message each time the Client detects or reacts to an event. Be
advised that log entries fill memory quickly if the Debugging level is chosen. Do not use the
Debugging option for a significant length of time because most internal operations generate
messages.
Defaults Tap this button to return log settings to the default settings.
Disable Wireless Zero
Config Use this option only as directed by technical support.
Selecting this option disables other wireless utilities whether the Client is running or not. If not
selected, other wireless utilities cannot apply their settings to the wireless card while the Client
is running (although their status displays are usually unaffected). You will need to perform a soft
reset whenever this setting is changed.
Port Manager Timeout The interval at which the client polls the ports. This is used under different circumstances, for
instance after physical changes such as card removal or insertion have been detected. This
value should not be changed from the 10-second default unless so advised by technical support.