Uphone configuration, Accessing, Requirements – Hand Held Products 9500 User Manual
Page 189: Tab windows, Uphone configuration -19, Accessing -19 requirements -19 tab windows -19, Ars on the system tab. for details, see
Dolphin® 9500 Series User’s Guide
9 - 19
uPhone Configuration
uPhone Settings enable you to establish the normal operating parameters for uPhone applications.
Accessing
You can access uPhone Settings two ways:
1. Tap Start > Settings > System tab > uPhone icon
.
2. In the Dialler application, selecting Tools > Configuration.
Requirements
Because this control panel adjusts network settings, the GSM radio must be powered up, and a SIM must be installed for it to
open correctly. If not, you will receive a notification message when you try to open the control panel.
If the radio is powered up and a SIM installed, an animated wait icon displays the following message while the system accesses
the network: “Settings on the Network are being accessed. Please wait…”
If there is no response from the network within 60 seconds, this message times-out and the control panel closes. Otherwise, the
uPhone Settings screen displays; the General tab appears first by default.
Tab Windows
uPhone Settings consists of five tabs: General, Network, Divert, Bar, Messaging, and Other.
Tapping OK accepts any changes and exits the uPhone Settings.