Henny Penny OFE/OFG-322 - Manual (Page 15)

Model OFE/OFG-321,322,323,324
2-16. GAS CONTROL VALVE
ASSEMBLY
(Continued)
3. Using a 7/16 inch wrench, remove the pilot line from the gas
control valve.
4. Using a 1 inch wrench, loosen the nut securing the main gas
inlet line to the gas control valve.
5. Using 5/8 inch wrench, remove the two burner gas line fittings
at the black tee fitting, located behind the control panel area.
6. Using a Phillips head screwdriver, remove the three screws
securing the gas control valve bracket to the frame of the fryer
behind the control panel area.
203
2-15