Henny Penny OFE/OFG-322 - Manual (Page 23)

Model OFE/OFG-321,322,323,324
2-20. SPEAKER ASSEMBLY
(Electric Units)
The speaker assembly emits audible signals to let the operator
know when cooking and hold times are finished.
1. Remove electrical power supplied to unit.
To avoid electrical shock or property damage, move the
POWER switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2.
Remove control panel.
3. Follow the speaker wire and disconnect from control board.
4. Remove the screws securing the speaker bracket to the shroud.
5. Remove the speaker from the bracket.
6. Reinstall in reverse order.
2-21. HIGH TEMPERATURE
LIMIT CONTROL
The electric units, model OFE-321/2/3/4, use the same high
(Electric Units) temperature control limits as the gas units, OFG-321/2/3/4, but
the mounting of the capillary tube is different on the electric
units compared to the gas units.
Checkout:
Use the same procedure as in the High Limit Temperature Control
(Gas) Section.
Replacement:
To avoid electrical shock or property damage, move the
POWER switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle, to the frypot
to be worked on. Be aware the other controls will have
power.
203 2-23