Hitachi MK-96RD621-08 - Manual (Page 105)

Using the Storage Navigator GUI 3-39
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
The displayed items on the Port dialog box are as follows:
• SLPR list:
You can display the information on a particular SLPR as you select the SLPR
in the SLPR list. If you have logged in as a storage partition administrator,
only the information on the allocated SLPR is displayed, and you cannot
select other SLPRs in this list.
• Type list:
You can select a port type and the information only on the selected port
type is displayed on the Port list. One of the following ports can be
selected:
– Fibre: The information only on the fibre ports is displayed.
– Serial: The information only on the serial ports is displayed.
– Mfibre: The information only on the Mfibre ports is displayed.
• Port list:
The information on the port that is selected by the Type list is displayed.
Following are the displayed items for each port type. For more detailed
information about the displayed items, please see the LUN Manager User’s
Guide.
– The displayed items when Fibre is selected by the Type list:
SLPR: SLPR number and SLPR name.
Port Name: Port name.
Type: Type of port, which is Fibre, is displayed.
Host Speed: Data transfer speed for fibre-channel ports. The unit is
Gbps (Gigabits per second).
Addr. (Loop ID): Address and Loop ID of port.
Fabric: Indicates whether a Fabric switch is used. Enable or Disable is
displayed.
Connection: Topology. FC-AL or P-to-P is displayed.
Attribute: Port attribute. Initiator, Target, RCU Target, or External is
displayed.
WWN: WWN of host bus adapter.
– The displayed items when Serial is selected in the Type list:
SLPR: SLPR number and SLPR name.
Port Name: Port name.
Type: Type of port, which is Serial, is displayed.
Attribute: Port attribute. LCP is displayed.