Hitachi MK-96RD621-08 - Manual (Page 96)

3-30 Using the Storage Navigator GUI
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
The Syslog window has the following features:
• Output to Primary Server: You can specify whether to transfer the audit
log to the primary syslog server. To transfer the audit log, select Enable.
To not transfer the audit log, select Disable.
• Primary Server Setting: You can set an IP address and a port number
for the primary syslog server. Once you set Output to Primary Server to
Enable, IP and Port become available. For both IP and Port, the defaults
have been entered, so change them as needed.
You can set either IPv4 address or IPv6 address for IP address. However,
only IPv4 address is available when the operating system of your SVP is
Windows XP.
– To set an IPv4 address, select IPv4. For IP, enter four integers in the
range of 0 to 255 (for example,
nnn.nnn.nnn.nnn
, where n is a number).
Only enter numbers. Do not enter the intervening periods.
– To set an IPv6 address, select IPv6. For IP, enter eight hexadecimal
numbers in the range of 0 to FFFF (for example,
hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh
, where h is a hexadecimal digit).
Only enter hexadecimal numbers. Do not enter the intervening colons.
– For Port, enter one integer in the range of 1 to 65,535.
• Output to Secondary Server: You can specify whether to transfer the
audit log to the secondary syslog server. To transfer the audit log, select
Enable. To not transfer the audit log, select Disable.
• Secondary Server Setting: You can set an IP address and a port number
for the secondary syslog server. Once you set Output to Secondary
Server to Enable, IP and Port become available. For both IP and Port,
the defaults have been entered, so change them as needed. The restriction
for the available values is the same as that of Primary Server Setting.
• Location Identification Name: You can name, as you like, the storage
system that transfers the audit log to syslog servers, so that you can
identify the storage system. You can enter 32 one-byte characters at the
maximum. Available characters are alphabets (A-Z and a-z), numeric (0-9),
and symbols (including ! " # $ % & ' ( ) = - ~ ^ | \ { } [ ] @ ` : ; * + _ ?
/ < > .). However, a comma (,) and a space cannot be used.
• Output Detailed Information: You can set whether to transfer the
detailed information of the audit log file to the syslog server. If you want to
transfer the detailed information to the syslog server, select Enable. If you
do not, select Disable. In the syslog file that is stored in the SVP, the
detailed information is always stored regardless of this setting.
• Download Syslog: Downloads the syslog file to the Storage Navigator
computer.
• Apply: Allows you to make all the settings made on the Syslog window
effective. This button is available only when you are in the Modify mode.