Hitachi MK-96RD621-08 - Manual (Page 134)

4-10 Performing Storage Navigator Operations
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Disabling Storage Navigator Options
To disable Storage Navigator options on the Storage Navigator:
1. Log into the Storage Navigator and open the License Key window (see
License Key Window).
2. Change to Modify mode.
3. Select the desired option that you want to uninstall in the list.
The selected option is displayed in reverse video.
4. From Mode, click Key Code.
5. Click Uninstall.
A confirmation message is displayed.
6. Click OK (or Cancel).
The row of the selected option changes to blue bold italics and also
changes the displayed status to Uninstall.
7. When you want to disable some other option, repeat the steps from 3 to 6.
8. Click Apply (or Cancel).
The status of the uninstalled option changes from Installed to Not
Installed.
Cautions:
• On rare occasions, a program product option that is displayed as Not
Installed but still has available licensed capacity (shown as XX TB)
might remain in the list. In this case, select that option and select
Uninstall to reset the information of the option.
• When you uninstall Data Retention Utility, an error might occur even if
the Permitted Volumes column of the License Key window indicates
that the licensed capacity is 0TB (zero terabyte).
To remove the error and continue uninstallation, take the following steps:
1. Open the Data Retention Utility window and then find logical volumes
that are unusable as S-VOLs (secondary volumes). For detailed
instructions, see the Data Retention Utility User’s Guide.
2. Change the settings of the logical volumes so that the logical volumes
are usable as S-VOLs. For detailed instructions, see the Data Retention
Utility User’s Guide.
3. Return to the License Key window and then uninstall Data Retention
Utility.