Enabling and disabling storage navigator options, Enabling options using a license key code, Enabling options using a license key code -6 – Hitachi MK-96RD621-08 User Manual
Page 130: Enabling and, Disabling storage navigator options. for
4-6
Performing Storage Navigator Operations
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Enabling and Disabling Storage Navigator Options
To activate the program product options of USP V/VM on Storage Navigator,
the program product options need to be installed using license keys. This
section describes the program product options on Storage Navigator, and the
procedures of installing and uninstalling the program product options from the
License Key window (see License Key Window).
Only the storage administrators can install and uninstall the program product
options.
If storage partition administrators want to use the program product options for
their own SLPRs, the program product options have to be installed by the
storage administrators using the License Key window, and then the licensed
capacity for each program product option has to be allocated to SLPRs using
the License Key Partition Definition window by the storage administrators. For
the description of the License Key Partition Definition window and the
procedure of allocating licensed capacity to the SLPRs, see the Virtual Partition
Manager User’s Guide.
Enabling Options Using a License Key Code
To enable a USP V/VM Storage Navigator option by using the license key code:
1. Log into the Storage Navigator and open the License Key window (see
2. Change to Modify mode (see Changing Between View Mode and Modify
Mode if you need instructions).
3. Select Key Code in Mode.
4. In Key Code, enter the license key code. You cannot copy and paste text
from other applications.
5. Click Install.
The row of the installed option changes to
blue bold italics
and the
Status column changes to
Install
.
–
Important: To implement the setting, you must click Apply.
–
If you want to disable the term key, perform the operations which are
described in Enabling or Disabling a License.
–
When you want to enable some other options, repeat the steps from 3
to 5.
6. Click Apply (or Cancel).
The status of the enabled options changes to Installed.
Warning messages are displayed in the following cases:
–
The error code # 405 5503 is displayed if you install an emergency key
for the option that has already been installed with a permanent key.
If you install the emergency key, it expires in 30 days.