Hitachi MK-96RD621-08 - Manual (Page 57)

Installation Requirements and Procedures 2-29
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Figure 2-18 Internet Explorer Message (This May Appear When You
Log into the SVP from a Windows Server 2003 Computer)
Changing Between View Mode and Modify Mode
Storage Navigator has two modes of operation: Modify mode and View
mode.
• View mode is for viewing the settings of the storage system. The operation
mode is in the View mode when you log in to Storage Navigator.
• Modify mode locks the setting operation of other users so that the other
users cannot change the settings of the storage system.
You must operate in the Modify mode to change the settings of the
storage system. You also need the operation authority of the function to
change the settings of the storage system. For detailed information on
setting the operation authority, see Changing User Operation Authority.
Only one user can be in the Modify mode for each storage system. While a
storage administrator is in the Modify mode, all other users can only view the
storage system information in the View mode. If the storage system is
partitioned, only one user can be in the Modify mode for each SLPR. Any
other users in the allocated SLPR can only view the storage system
information in the View mode. Some dialog boxes are not displayed in View
mode. To view such information in View mode, view the Basic Information
display dialog box.
To change between View mode and Modify mode:
1. Verify that the icon is displayed, which indicates that the storage system
is unlocked.