Hitachi MK-96RD621-08 - Manual (Page 75)

Using the Storage Navigator GUI 3-9
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
– Installed (Disable) : Installation is complete, but the license is set to
disable. The Product Name column displays the Not Installed icon
( ).
This status might be displayed if an error occurs after you install
option(s). Resolve the error and enable the license.
– Not Installed : The option is not available. The Product Name column
displays the Not Installed icon ( ).
– Not Enough : Installation is complete, but the license capacity is
insufficient. This status is also displayed when the license key of this
program product is installed but the license key of the prerequisite
program product is expired. The Product Name column displays the
Not Installed icon ( ).
– Capacity Insufficient: The licensed capacity is insufficient because
hard disk drives are added, or pairs have been created by a program
product such as TrueCopy. The license expires in 30 days. The Product
Name column displays the Installed icon ( ). Please purchase the
licenses before the license key expires.
– Time Out : The term has already expired for the temporary key. The
Product Name column displays the Not Installed icon ( ). When the
status is Time Out, you cannot re-install the temporary key.
The following table explains the icons shown on the License Key window.
Table 3-1 License Key Status Icons
License Key Window Display License Key Status
Icon Product
Name
(Note 1)
Key Type Permitted
Volume
Term
(days)
Status
Not installed.
(Not
Installed).
Option
name Not
Installed – – Not
Installed
Installed with the Permanent
key.
(Installed)
Option
name Permanent Unlimited
or X TB
(Note 3) – Installed
Installed with the Term key
and set to enable.
(Installed)
Option
name Term Unlimited
or X TB
(Note 3) (Note 2) Installed