Device information, Device information -13 – Hitachi MK-96RD621-08 User Manual
Page 79
Using the Storage Navigator GUI
3-13
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
If you input any changes, the text may be displayed in
blue bold italics
or an
icon may change (see Table 2-5). The changes are not actually implemented
until you click Apply.
Device Information
Device Information is the upper part of the Information window.
•
Serial Number: Serial number of the connected storage system.
•
IP Address: IP address of the connected storage system (SVP).
•
Name: Device name of the connected storage system. The Storage
Navigator user can change the device name with the Modify mode. You
must enter a device name using up to 180 alphanumeric characters (ASCII
codes), except for some symbols, such as
"
,
\
,
;
,
:
,
,
,
*
,
?
,
<
,
>
,
|
,
/
,
^
,
&
,
and
%
. You can also use a space, except for before and after the device
name. If you enter a space before or after the device name, an error
occurs when you click Apply. The device name is required to use SNMP
Agent. For detailed information on SNMP, please see the SNMP Agent User
and Reference Guide.
Make sure to document the device name, because the settings will be
cleared when the SVP is replaced.
•
Contact: Contact information such as personnel and telephone number
where you can inquire about the connected storage system. The Storage
Navigator user can change the contact information with the Modify mode.
You must enter the contact information using up to 180 alphanumeric
characters (ASCII codes), except for some symbols, such as
"
,
\
,
;
,
:
,
,
,
*
,
?
,
<
,
>
,
|
,
/
,
^
,
&
, and
%
. You can also use a space, except for before and after
the contact information. If you enter a space before or after the contact
information, an error occurs when you click Apply. The contact name is
required to use SNMP Agent. For detailed information on SNMP, please see
the SNMP Agent User and Reference Guide.
Make sure to document the contact name, because the settings will be
cleared when the SVP is replaced.
•
Location: Location of the connected storage system. The Storage
Navigator user can change the device location with the Modify mode. You
must enter a device location using up to 180 alphanumeric characters
(ASCII codes), except for some symbols, such as
"
,
\
,
;
,
:
,
,
,
*
,
?
,
<
,
>
,
|
,
/
,
^
,
&
, and
%
. You can also use a space, except for before and after the
location. If you enter a space before or after the location, an error occurs
when you click Apply. The device location is required to use SNMP Agent.
For detailed information on SNMP, please see the SNMP Agent User and
Reference Guide.
Make sure to document the device location, because the settings will be
cleared when the SVP is replaced.
•
Firmware Version: