Hitachi MK-96RD621-08 - Manual (Page 70)

3-4 Using the Storage Navigator GUI
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
– While the updating processing caused by the Refresh All command is
in progress, the system status keeps changing and other users are not
allowed to operate from the Storage Navigator windows. The
maintenance operation of the storage system or the SVP operation by
the service personnel are not allowed, either. Therefore, the use of the
Refresh All command is not recommended, unless error recovery is
required.
– The Storage Navigator windows may not be properly displayed even
though you have selected the Refresh All command, while the
maintenance operation of SVP is in progress.
• The Refresh command ( ) displays the latest information on the Storage
Navigator main window.
The information might not be displayed correctly when the exclusive lock is
effective or SVP maintenance is in progress.
• The Logout command ( ) closes the Storage Navigator main window.
Go Menu
The Go menu allows you to start the desired window. When you click the Go
menu, the program product option names and function names are displayed.
Each name in the Go menu has a submenu which displays tab names of the
corresponding options or functions.
The contents of the Go menu differs depending on the operation authority of
the user account. For the contents of the Go menu, see Permission
Information List.
Help Menu
When you click the Help menu, the following command is displayed.
• The About command opens the About dialog box which displays the
storage system information.
The About dialog box has the following features:
– Subsystem: Product name of the connected storage system.
– Serial Number: Serial number of the connected storage system.
– IP Address: IP address of the connected storage system (SVP).
– Name: Device name of the connected storage system that you set in
the Information window (see Device Information).
– Contact: Contact information that you set in the Information window.
– Location: Location of the connected storage system that you set in the
Information window.
– Main Version: Version of the microprogram installed in the connected
storage system.