Hitachi MK-96RD621-08 - Manual (Page 98)

3-32 Using the Storage Navigator GUI
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Figure 3-11 Audit Log Window
The Audit Log window has the following features:
• Output to Primary Server: You can specify whether to transfer the audit
log file to the primary FTP server. To transfer the file, select Enable. To
not transfer the file, select Disable.
• Primary Server Setting: You can set an IP address for the primary FTP
server. Once you set Output to Primary Server to Enable, IP becomes
available. The default IP address has been entered, so change it as needed.
You can set either IPv4 address or IPv6 address for IP address. However,
only IPv4 address is available when the operating system of your SVP is
Windows XP.
– To set an IPv4 address, select IPv4. For IP, enter four integers in the
range of 0 to 255 (for example,
nnn.nnn.nnn.nnn
, where n is a number).
Only enter numbers. Do not enter the intervening periods.
– To set an IPv6 address, select IPv6. For IP, enter eight hexadecimal
numbers in the range of 0 to FFFF (for example,
hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh
, where h is a hexadecimal digit).
Only enter hexadecimal numbers. Do not enter the intervening colons.
• Primary Server Login User: You can set UserID and Password to log
into the primary FTP server. You can enter up to 256 alphanumeric
characters and symbols (ASCII codes) for user ID and password.