Hitachi MK-96RD621-08 - Manual (Page 69)

Using the Storage Navigator GUI 3-3
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
• The Cancel button cancels the changes or settings made on the Storage
Navigator main window.
This button is active only when you are in the Modify mode.
• PP Status displays the SIM severity level. PP Status is displayed if a SIM
occurs related to a program product license because the license is expired
or the licensed capacity is insufficient. However only the storage
administrator with the Enable authority of Storage Administrator Role
will be able to see the display.
PP Status can display any of the following SIM severity level statuses:
–
–
–
–
–
If PP Status : Normal is displayed, no SIM has occurred. If any other
status is displayed, view either the License Key window or the Status
window to identify which program product has a problem. You may find
that you need to consider purchasing the license.
When multiple SIMs occur, only the SIM with the highest severity is
displayed. For the difference between SIM severity levels, see Status
Window.
File Menu
When you click the File menu, the following commands are displayed.
• The Basic Information command ( ) displays the Basic Information
Display dialog box which displays the basic configuration information on the
storage system. The Basic Information Display dialog box is displayed as
another window apart from the Storage Navigator main window, therefore
it can be displayed regardless of the operation of the Storage Navigator
options. For details on the Basic Information Display dialog box, see Basic
Information Display Dialog Boxes.
• The Refresh All command ( ) allows you to update the information on
the SVP and then display the latest information on the Storage Navigator
main window. As you click this command, all information displayed on the
Storage Navigator is reacquired from the storage system, therefore it takes
time until the processing caused by this command has been completed.
– The Refresh All command is only displayed, when you log in as a
storage administrator. The Refresh All command becomes available,
when you have changed to the Modify mode.