Document Outline

• Introduction
• Before applying power
  • For the United Kingdom
  • For Australia and Europe
  • Important!
  • For other countries
  • Important!
• Before operation
  • Notes on cassette tape
  • Cleaning the head section
  • Beware of condensation
  • Disc handing precautions
  • Caution on disc used
  • FM DE-EMPHASIS / CHANNEL SPACE switch (Except for some areas)
  • Note related to transportation and movement (CD player)
• System connections
  • Connection of parallel cord
    • Connection method to each antenna terminal
  • AM loop antenna connection
  • AM outdoor antenna connection
  • I 75 Q coaxial cable connection (Europe and U.K. only)
  • Connection of front speakers
  • Connection of surround (rear) and center speakers (optional)
  • Connection of super woofer (optional)
• Connection of Audio / Visual components (optional)
• Controls and indicators
  • CD Player Unit
  • Speaker Unit
• Operation of remote control unit
  • Loading batteries
  • Operation procedure
• Listening to sound
  • To listen to a radio broadcast
  • To listen to a tape
  • To listen to a CD
  • Select a station.
  • Play the tape.
  • Play the CD.
  • Adjust the volume.
• Time adjustment
  • 1 Press the ADJUST key.
  • 2 Input the year using the numeric keys, and press the EIMTER key.
  • 3 Input the month then the day, and press the ENTER key.
  • Input the time of the day.
  • 5 Press the ENTER key.
  • Displayed contents and DISPLAY key
• Audio adjustment
  • Adjusting the volume
  • Adjusting the !eft and right volume balance
  • Compensation of bass sound
  • Selecting the input source
    • STAND BY mode of POWER switch
    • Automatic play operation function associated with input selector key of preamplifier / tuner
  • Listening through headphones
    • Insert the headphone plug into the headphones jack.
    • 2 Adjust the volume.
  • ■ Operation of super woofer key
    • 1 Press the S.W. OUT key.
    • Adjust the super woofer volume.
    • Using the power amplifier's meter mode
• Sound fields
  • Mode Features and Characteristics I Acoustic modes]
  • Speaker layout
    • Standard layout
    • When the surround rear speakers are not used
    • When the center speaker is not used
    • When only two speakers are used
    • Setting the Delay time | DOLBY SURROUND PRO LOGIC only|
• DOLBY 3 STEREO
  • ■ Dolby 3 STEREO adjustment
    • |Remote control unit only|
    • "I Set the Dolby 3 STEREO mode.
    • Select the center mode.
    • Turn on the test tone.
    • Adjust the center speaker volume.
    • 0 Stop generating the test tone.
  • Dolby 3 STEREO playback
    • "] Set the Dolby 3 STEREO mode.
    • 2 Check the center mode.
    • Play a stereo software program or a Dolby surround program.
    • 4 Adjust the volume and tone.
• DOLBY SURROUND
  • Dolby Surround field adjustment
    • Remote controi unit only
    • Set the Dolby Surround mode.
    • 2 Select the center mode.
    • 3 Turn on the test tone.
    • 4 Adjust the volume balance.
    • Center mode
  • ■ Operation of Dolby Surround playback
    • To return to normal stereo playback
• Acoustic Sound
  • Acoustic modes
  • Acoustic sound playback
• Presence
  • Presence playback
    • Play a music source.
    • 'I Select the Surround mode.
    • I
      • 2 Select the presence mode.
      • 3 Adjust the rear speaker volume.
    • L_n_]
      • 4 Adjust the center speaker volume.
      • Adjust the sound expansiveness.
      • To cancel the presence effect
      • To record the presence effect
      • DSP (Digital Signal Processor)
      • Sound expansiveness If. 4CH, S. 4CH I
• Reception of radio broadcast
  • Receiving broadcast stations and storing them in memory (preset operation)
    • Display the frequency display.
    • 2 Select the broadcast band.
    • 0 Select the tuning mode.
    • 4 Tune the desired station.
    • Store the station in preset memory.
    • |RemoteControl unit only]
  • Receiving a preset station
    • Remote Control unit only
    • Select the desired station.
    • Listening to all preset stations in sequence (PRESET CALL)
      • I Remote Control unit only |
      • Press the P.CALL key.
    • ■ Direct tuning of radio stations
      • {Remote Control unit only!
      • Select the broadcast band.
      • 2 Press the DIRECT key.
      • ■ Displaying station names [Remote control unit only^
      • 1 Receive FM 93.4MHz, and enter the character input mode.
      • 2 Select the characters to be displayed with that station.
      • 3 End the character input.
      • 4 Preset them under key [
      • ■ Changing a station name |Remote control unit only |
• Operation of graphic equalizer
  • 1. AI-AUTO (available only for CD play)
  • 2. AI-FOCUS (available only for CD play)
  • 3. Al -LOUDNESS
  • 4. Preset pattern mode
  • 5. AI-LINK
  • mmiZDGDGD
  • DOLBY SURROUND and PRESENCE keys
  • HIT MASTER key
  • How to use the preset equalizer patterns
    • Play
    • a music source.
    • 2 Select the desired equalizer pattern.
    • To cancel the equalizer effect.
  • List of equalizer patterns
  • ■ Operation of Al AUTO (for CD play only)
    • Verify that the presence indicators (F.4ch, S.4ch) are extinguished.
    • 2 Press the Al AUTO / Al FOCUS key.
    • The playback starts automatically.
    • To cancel Al AUTO
    • ■ Al FOCUS operation (for CD play only)
      • To cancel Al FOCUS
• Playing CDs (UD-900M)
  • Loading a disc into the magazine
  • Loading a magazine
  • Loading a disc in the plus-1 tray
  • Removing a magazine
    • 1 Open the door.
    • 2 Remove the magazine.
    • 3 Close the door.
  • Playing a CD from the beginning
    • *1 Place a disc In the magazine or on the plus-1 tray.
    • 2 Start playback.
  • ■ Listening from the desired track
    • Make sure the PGM indicator is extinguished.
    • 2 Select the desired disc.
    • 2 Select the desired track.
    • G3
    • To fast forward and backward
    • TIME key
  • Playing desired tracks in desired order (PGM mode) | Remote control unit oniy|
    • "I Enter the PGM mode,
    • 2 Program desired tracks in desired order.
    • 3 Start playback.
    • To check the programmed order
    • To resume normal playback
  • To add a track to the program
    • I Remote control unit onl^
  • To change a track in the program
    • Remote control unit onlyl
    • t Press the CHECK key.
    • 2 Select the track No. to replace the previous one.
    • ED ^
  • To clear tracks from the program
    • Clearing from the last track
    • Clearing the whole of program
    • Auto-Space function
  • Playing tracks in a random order
    • Make sure the PGM indicator is extinguished.
    • 2 Select the desired random mode.
  • 6 6 6
• Playing CDs(UD-900)
  • UD - 900 (0P -A9i
  • Listening from the desired track
    • Select with the skip key.
    • Select with the search key.
    • Select with the numeric key.
    • ^ Ensure that the CD player is in the 1 TRACK mode.
    • 25 Select the desired track.
  • Playing desired tracks in desired order (PGM mode)
    • "I Enter the PGM mode.
    • 2 Program desired tracks in desired order.
    • 2 Start playback.
    • To check the programmed order
    • [Remote control unit only|
    • To resume normal playback
    • To check the time of each track on the disc.
  • To add a track to the program
  • To clear tracks from the program
  • To change a track in the program
    • Remote control unit only
  • 1 Press the CHECK key.
    • Q Press the key(s) to input the track No. to ^ replace the previous one.
  • Ш ED E3 ED CZ)
  • G3
    • Auto-Space function
  • Repeated playback
    • Repeated playback of programmed tracks. 'I Enter the PGM mode.
    • 2 Select the desired track(s).
    • Repeated playback of the whole CD.
    • 1 Enter the TRACK mode.
    • 2 Press the REPEAT key.
    • 2 Start playback.
• Playback operation of cassette decks
  • To playback a tape
    • Dolby noise reduction system
  • To wind the tape at high speed
  • ■ Relay playback
    • 2 Press the key or [S key.
    • Tape transport direction indicators
    • *1 Insert tapes.
    • 2 Select the playback mode.
    • 3 Start playback.
• DPSS operation
  • 1. Skip play
  • 2. Single-tune repeated
  • To play a tune located immediately after the tune being played.
  • To play a tune located 4 tunes beyond.
  • The DPSS will not function properly with the following types of tapes.
  • ■ Rewind & Play operation
  • Single-tune repeated playback operation
  • ■ Dash 8l Play operation
    • *1 Determine the playback mode (conditions).
    • To cancel the playback above in the middle.
• Recording operation on cassette deck (Deck B only)
  • ■ Ordinary recording
    • Set up the cassette deck.
    • 2 Select the source to be recorded.
    • To apply the equalizer effect
    • 3 Activate the auto-bias setting.
    • ^ Set the recording level.
    • Start recording.
    • Auto-bias function
    • To pause recording temporarily
    • ■ To re-start recording after mistake
    • To stop recording
      • ^ stop recording and rewind tape.
      • 2 Re-start recording.
      • CRLS
      • Recording with Dolby HX Pro
      • What is Dolby HX Pro ?
    • ■ Synchro recording of CD
      • Set up the cassette deck.
      • 2 Activate the auto-bias setting.
      • 0 Adjust the recording level.
      • 4 start playing the CD.
    • ■ Operation of CD REC key
      • ^ Press the CD REC key of the preampli- * fier / tuner.
      • 2 Start recording the CD.
      • 3 Select the music source to be listened to.
      • To cancel CD RED operation
      • Recording modes
• Recording of CD playback (OCRS)
  • CCRS {Computer-controlled CD Recording System)
  • Fade-in and fade-out
  • CCRS double-speed recording
  • M Recording of CD playback in TRACK mode
    • 4 Select CD with the input selector, and * place a CD the tray.
    • 2 Perform "Ordinary recording" until step 2.
    • O Check that the CD player is in the TRACK ^ mode.
    • 4 Start recording.
  • ■ Recording of CD playback in PGM mode
    • ^ Select CD with the input selector, and place a CD on the tray.
    • 2 Perform "Ordinary recording" until step 2.
    • O In the PGM mode, select the order of ^ tracks to be played.
    • 4 Start recording.
  • ■ Normal EDIT recording
    • Set up Deck B ready for recording.
    • To apply an equalizer effect
    • 2 Select the CD input.
    • 2 Insert the disc in the CD player.
    • ^ Select the EDIT mode with the EDIT MODE key of the CD player.
    • 0 Input the two-way recording time of the tape.
    • 0 Press the OCRS key.
  • ■ Al EDIT recording
    • Set up Deck B ready for recording.
    • Insert the disc in the CD player.
    • Select the tracks which must not be cut in recording.
    • Select the Al EDIT mode with the EDIT MODE key of the CD player.
    • 7 Press the CCRS key.
  • MULTI EDIT (Multiple disc edit) recording
    • 1 Set up Deck B ready for recording.
    • 3 Insert the disc in the CD player.
    • A Select the MULTI EDIT mode with the EDIT MODE key of the CD player.
    • Input the two-way recording time of the
    • tape.
    • 0 Select the tracks to be recorded.
    • 7 Press the OCRS key.
  • To check the edited contents
    • [Remote control unit onl^
  • To clear the edited contents I Remote control unit only]
    • Clearing individual tracks from the last track (MULTI EDIT only)
    • Clearing all edited contents
  • X.FADE recording of CD playback
    • I Not available with double-speed recording j
    • 4 Select CD with the input selector, and * place a CD on the tray.
    • 2 Perform "Ordinary recording" until step 2.
    • 3 Start recording.
• Tape dubbing
  • To stop dubbing
  • To pause dubbing
• Operation with video components
  • Playback of videotape
    • '*1 Switch the power of the monitor TV ON. 2 Set the input selector to VIDEO mode.
    • 3 Play the VCR.
  • Recording of video source
    • ^ Connect the video component to be re¬
    • corded.
    • 2 Select the corresponding input source.
    • 3 Play the video source component.
    • Put the VCR in the record mode.
  • Listening to CD or tape sound while watching video
    • Select the video component the image " of which is to be viewed.
    • 2 Press the VISUAL FIX key.
    • 3 Select the audio source to be listened to.
    • Play the selected video and audio components.
    • VISUAL FIX key
• Simple Karaoke singing entertainment
  • HIT MASTER:
  • Microphone mixing
    • ^ Turn the MIC MIXING control fully coun- * terclockwise.
    • ^ Insert the microphone plug into the MIC ^ jack.
  • Singing "Karaoke”
    • Play the music source.
    • 2 Press the HIT MASTER key.
    • 2 Sing along with the music.
  • Recording "Karaoke"
    • Adjust the volume balance between the microphone and source.
    • *1 Connect a microphone.
    • 2 Ensure that the CD REC is OFF.
    • 3 Press the HIT MASTER key.
    • M Perform the "Ordinary recording " pro- ^ cedure until step 4.
    • 0 Start recording.
    • 0 Stop recording.
  • Timer reception of radio broadcast [ Remote control unit oniyi
    • Switch the power ON. p
    • Select the program setting mode.
    • 3 Select the program No. to be used.
    • Specify the day(s) of the week with the numeric keys.
    • Input the ON time with the numeric keys.
    • Input the OFF time with the numeric keys.
    • 0 Select the TUNER source.
    • 0- L
    • 10 Activate the execution of the program.
    • 11 Adjust the volume and tone.
    • 12 Switch the power OFF. {; [Q
    • y Select the PLAY mode.
    • To continue the reception of radio station which as been started to be received by timer ON:
    • Timer playback of CD | Remote control unit only I
    • ^ Switch the power ON. ^
    • 2 Select the program setting mode.
    • 3 Select the program No. to be used.
    • ^ Specify the day(s) of the week with the
    • numeric keys.
    • 5 Input the ON time with the numeric keys.
    • 0 Input the OFF time with the numeric keys.
    • sP
    • y Select the PLAY mode^
    • 0 Select the CD source.
    • 0 Place a disc in the CD player.
    • 10 Activate the execution of the program.
    • 11 Adjust the volume and tone.
    • 12 Switch the power OFF.
  • Timer recording of radio broadcast | Remote control unit only]
    • Switch the power ON and receive a station to be recorded.
    • 2 Select the program setting mode.
    • 3 Select the program No. to be used.
    • ^ Specify the day(s) of the week with the
    • numeric keys.
    • Select the preset key under which the station to be received has been preset.
    • Input the ON time with the numeric keys.
    • 10 Activate the execution of the program.
    • Input the OFF time with the numeric keys.
    • y Select the REC mode.
    • 11 Switch the power OFF.
  • To check timer program contents I Remote control unit only|
  • To cancel timer program execution
  • ■ Operation of one-touch timer
  • ■ Operation of Al TIMER 1
    • 1 Complete the program timer setting.
    • 2 Press the Al TIMER 1 key.
  • ■ Operation of Al TIMER 2
    • Place a disc in the CD player.
    • o Perform operations of "Timer reception ^ of radio broadcast".
    • 3 Press the Al TIMER 2 key.
    • To cancel the execution of Al TIMER 1
    • I )
    • Reference for volume selection
    • To cancel Al TIMER 2
  • ■ Operation of sleep timer
    • I Remote control unit only|
    • Switch the power ON.
    • O Specify the period after which the power ^ is to be switched OFF.
  • ■ Operation of calendar check
    • I Remote control unit only |
    • 2 Input the year with the numeric keys.
    • O Input the month then the day with the ^ numeric keys.
• In case of difficulty
  • Remote control unit
  • Preamplifier / tuner unit, power amplifier unit, speakers
  • Cassette decks
  • In case of difficulty
    • CD player
    • Pre Amplifier / Tuner unit (C-A9L)
    • Power Amplifier unit (B-A9)
    • Strömbrytarens POWER beredskapsläge
    • Virtanäppäimen (POWER) valmiustiia (STAND BY)
    • Afbrydertastens (POWER) STAND BY funktion
    • PÄ/AV-knappens Stand-by funksjon
    • Pre Amplifier / Tuner unit (C-A9)
    • Power Amplifier unit (B-A9)
    • FCC WARNING
    • NOTE:
    • Pre Amplifier / Tuner unit (C-A9)
    • Power Amplifier unit (B-A9)
    • Note to CATV system installer: