Changing a station name |remote control unit only – Kenwood UD-900M User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNING/
“ CHARACTER keys
- CHARACTER key
- ENTER key
■ Changing a station name
|Remote control unit only |
Example: To change station name "FHN8" preset with AM (MW)
810 kHz frequency under numeric key [
2
] to "FEN".
^ Receive preset station of
[2]
by preset tuning, and enter the character input stand-by mode.
I
^
8 ! L
<-
a
CIIII)
Set the A / B switch to the "A" side
I
5
" 5
2 Move the blinking digit to the second digit.
6
6
h
?<
s
3
Select "E" with TUNING / CHARACTER key.
TUNWG/CHAHACTBl
[H]
b
flF'HB
^ Move the blinking digit by two digits.
f f !lBi
5 Select the blank with the TUNING / CHARACTER key.
TUNINGA
TUNING/CHAHACTCB
F E
The character input terminates automatically when fourth character has been input.
F E 8
0 Preset the new name under numeric key (^.
0 Press the ENTER key.
(
2
) Press numeric key [
2
].
Press while "MEMORY" is lighted.
MON
F E N
"MEMORY" lights up.
Example: When a station name is displayed with the I DISPLAY | key.
\____ / "MEMORY"
F E 8
UD-900/UD-900M(En}3