System connections, Connection of parallel cord – Kenwood UD-900M User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System connections
Do not plug in the power cord until all connections are completed.
• When stacking components, follow the indicated order in the connections diagram.
• When connecting the parallel cord , be sure to match the colors of the sockets.
• When connecting the related system components, refer also to the instruction manuals of the related components.
Connection of parallel cord
Hold the connector of the parallel cord in parallel with the socket on the
rear panel, and insert securely until it clicks.
Connect the parallel cord by matching the colors of the connector and socket.
When unplugging the parallel cord, push and hold the two ends of the
connector and pull the connector straight from the rear panel socket.
Preamplifier/tuner unit
Power amplifier unit
Notes;
1 Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2 When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
8
u
D-900/UD-900M (En)