Synchro recording of cd, Set up the cassette deck, 2 activate the auto-bias setting – Kenwood UD-900M User Manual
Page 59: 0 adjust the recording level, 4 start playing the cd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Synchro recording of CD
The cassette deck and the CD player can be started simultaneously.
Set up the cassette deck.
® Insert a tape in deck B.
(
2
)
Set the tape trans
port direction.
(
3
)
Select one-side or
two-side recording.
D ;Two-side recording
; ;One-side recording
(
4
) Select the Dolby IMR mode.
2 Activate the auto-bias setting.
The optimum bias is set in about 45 seconds, after
which the desk enters the stop mode.
0 Adjust the recording level.
® Play a CD.
C
• With the UD-900M (DP-MA9) system, select the de
sired disc.
d) Press the CRLS key.
Level
adjustment
completes in about
20 seconds.
Wait until the indi
cator lights steadily.
• The deck enters the record-pause mode.
(
3
)
To pause CD play.
4 start playing the CD.
© Select the desired tracks with the numeric key.
© Start playback.
• Recording starts at the same time.
• When the CD player has completed playback, the cas
sette deck stops recording and enters the stop mode.
To pause recording
Press the i»-/i!l key of the CD player.
To resume recording
Press the in| key of the CD player.
To stop recording
Press the lU key of the CD player.
• When the g] key on the cassette deck is pressed, the
cassette deck enters the stop mode, but the playback
of CD does not stop.
UD-900/UD-900M (En)
59