To add a track to the program, To clear tracks from the program, To change a track in the program – Kenwood UD-900M User Manual
Page 51: Remote control unit only, 1 press the check key, Ш ed e3 ed cz), Auto-space function, О о о\у
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To add a track to the program
To clear tracks from the program
Press the key(s) for the track No. to be added.
Clearing from the last track
1 2 3 4
О О О О
iRemote control unit only]
CLEAR
TO
5 6 7 8
О О О О
о о о\у
0
• Every time the key is pressed, tracks are cleared from
the last track in order.
To change a track in the program
Remote control unit only
1 Press the CHECK key.
CHECK
S
lights up.
ub P- [IE
Press repeatedly unit the program No. to be changed is displayed.
Q Press the key(s) to input the track No. to
^ replace the previous one.
Ш Ш Ш Ш Ш
FRI
SAT EVERY WEEK 1 WEEKS
Ш ED E3 ED CZ)
G3
Press while the fP.C.I indicator is lighted.
• The track being played cannot be changed.
Auto-Space function
During playback in the progrann mode, when thel SPACE
I
key is
pressed, a space of about 4 seconds is reserved automatically
between the programmed tracks. This function is provided to
facilitate the DPSS function of the cassette deck. However, such
a space could also be reserved in case the sound of two tracks
are continued for example with some classic music and live re
cordings.
• The total time is displayed including the time of the
space.
• To cancel Auto-Space function, press the|SPACE]key
again.
UD-900/UD-900M (En)
51