Kenwood UD-900M - Manual (Page 54)

Playback operation of cassette decks
To wind the tape at high speed ■ Relay playback
This function plays back the tapes in both decks A
and B continuously and repeatedly.
2 Press the key or [S key.
C5ZI3
o
@3: Fast tape S: Fast tape
winding in the winding in the
♦direction ♦direction
Tape transport direction indicators
The direction in which tape is transported during playback or re­
cording is indicated by the lighting of one of the indicators ◄ and ►.
The direction selected when the tape was stopped the last time
is maintained even after the power is turned off. When the tape
is started automatically by the automatic play operation, etc.,
the transport starts with the direction shown by the direction
indicator. If you want to change the transport direction for the
next time the power is turned on, press the play key of the op­
posite direction before turning power off.
, Ì
Lz___
*1 Insert tapes.
Tapes are played in the directions indicated by their re­
spective indicators.
2 Select the playback mode.
i am ]
ZD....Relay playback of both sides of tapes in decks A
and B is repeated.
ZZ ....Relay playback of only one side of tapes in decks
A and B is repeated.
> Relay playback cannot be performed if the DIRECTION
select switch is set to "O".
3 Start playback.
u
The playback starts with the deck the play key of which
is pressed.
54 u D-900/UD-900M (En)