Operation of remote control unit, Loading batteries, Operation procedure – Kenwood UD-900M User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of remote control unit
Loading batteries
Operation procedure
Plug the power cord of the system into an AC wall
outlet, and press the [POWER [key on the remote con
trol unit to turn the power on.
When the power is turned on, press the key of the
source component to be operated.
When two operation keys on the remote control unit
are pressed successively, press each key securely re
serving an interval of more than 1 second for each
press.
Remote control light sensor
Operating range
Notes;
1 The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2 When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3 Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In such a case, change the system installation position to prevent the malfunction.
UD-900/UD-900M (En)
17