Kenwood UD-900M - Manual (Page 33)

Receiving a preset station
Remote Control unit only
Select the desired station.
Press the numeric key.
□□ m [±] m ^
rai SAT Qcnv W ^1 WEEKS \ VV’V^
m CD m □□ izD
E.
U
• The frequency of the station received will be displayed.
Listening to all preset stations in
sequence (PRESET CALL)
I Remote Control unit only |
Press the P.CALL key.
U
Every time @{UP) is pressed, the preset stations are
received in order of 1 > 2
... 19 20 1....
Every time 0 (DOWN) is pressed, the preset stations
are received in order of 20 19... 2 1 20.....
When a key is held depresseed, the preset station are
received in sequence at 0.5-second intervals.The sta­
tion being received when the key is released will con­
tinue to be received.
■ Direct tuning of radio stations
If you know the frequency of the desired station, it
can be received directly by inputting the frequency
using the numeric keys^__________ _________
{Remote Control unit only!
Select the broadcast band.
<r
vQE) One of FM or AM (MW/LW).
Set the A / B switch to the "A" side.
%
2 Press the DIRECT key.
Set the A / B switch to the " B " side.
3 Input the frequency of the desired sta­
tion by pressing the numeric keys.
m CD CD □□ m
db m a @ m
GD
Example of input
Desired station Order of pressing numeric keys
FM 90 MHz [H , [o], O (100 kHz space)
[S , 0 - [o], 0 ( 50 kHz space)
FM 102.5 MHz H], [o], [D , [D (100 kHz space)
[T], |o], [D , Hi, 0 ( 50 kHz space)
AM (MW) 810 kHz H , Q] (10 kHz space)
[H , [B , (^ ( 9 kHz space)
AM (MW)1260 kHz [T), [U , [6] ( 10 kHz space)
ED - [B , d]. 0 ( 9 kHz space)
If you commit a nnistake in the input of numeric keys,
press the |CLEAR| key, and re-start the input from the
beginning.
The display blinks if you mistakenly enter the wrong
frequency. Re-enter the correct frequency.
UD-900/UD-900M (En) 33