Document Outline

• 1 Technical data
  • 1.1 Dimensions
  • 1.2 Anschlüsse / Schnittstellen
    • 1.2.1 KET-TM
    • 1.2.2 KEN-TM
• 2 Control elements and program structure
  • 2.1 Keyboard overview
  • 2.2 Overview of display
  • 2.3 Program structure
    • 2.3.1 Menu overview
    • 2.3.2 Navigation in the menu
  • 2.4 Authorisation levels
• 3 Basic instructions
  • 3.1 Proper use
  • 3.2 Improper Use
  • 3.3 Warranty
  • 3.4 Monitoring of Test Resources
• 4 Basic Safety Precautions
  • 4.1 Pay attention to the instructions in the Operation Manual
  • 4.2 Personnel training
• 5 Transport and storage
  • 5.1 Testing upon acceptance
  • 5.2 Packaging / return transport
• 6 Unpacking, Setup and Commissioning
  • 6.1 Installation Site, Location of Use
  • 6.2 Unpacking and placing
  • 6.3 Scope of delivery / serial accessories
  • 6.4 How to connect the platform
  • 6.5 Mains connection
  • 6.6 Commissioning
  • 6.7 Log out
  • 6.8 Putting out of service / Standby mode
  • 6.9 Basic Operation
    • 6.9.1 Simple weighing
    • 6.9.2 Zeroing
    • 6.9.3 Selecting weighing unit
    • 6.9.4 Weighing with tare
  • 6.10 Connection of peripheral devices
• 7 System settings (menu)
  • 7.4.1 Select information texts
  • 7.4.2 Selecting function keys
  • 7.4.3 Display all platforms
  • 7.4.4 Select bargraph type
  • 7.5.1 Inputs
  • 7.5.2 Outputs
• 8 Application settings
  • 8.1 Select application
  • 8.2 Application specific settings
  • 10.1 Select application
  • 10.2 Application specific settings
    • 10.2.1 Automatic reference optimization
    • 10.2.2 Minimum reference single weight
  • 10.3 Carry out parts counting
    • 10.3.1 Determination of the reference piece weight by weighing
    • 10.3.2 Enter reference single weight as numeric value
  • 10.4
    • 10.4.1 Load reference single weight from database.
    • 10.4.2 Allocating reference single weight in database to a product
  • 11.1 Select application
  • 11.2 Application specific settings
  • 11.3 How to carry out percentage calculation
    • 11.3.1 Determination of the reference weight by weighing
    • 11.3.2 Enter reference weight as numeric value
  • 12.1 Select application
  • 12.2 Application specific settings
  • 12.3 Defining recipe in database
  • 12.4 Process recipe from database
  • 12.5 Log recipe
  • 13.1 Select application
  • 13.2 Application specific settings
    • 13.2.1 Average time
    • 13.2.2 Auto start
  • 13.3 Dynamic weighing using manual start
  • 13.4 Dynamic weighing with automatic start
  • 14.2 Search for Data Record / Add Data Record
  • 14.3
  • 14.4 Deleting data record (administrator only)
  • 14.5 Print data record
  • 14.6 Basic data record operations via context menu
  • 14.7 Edit databases (administrator only)
  • 16.1 Overview interface commands
  • 16.2 General response format
  • 16.3 Detailed information about interface logs
    • 16.3.1 Zeroing
    • 16.3.2 Taring
    • 16.3.3 Retrieve tare value
    • 16.3.4 Set tare value
    • 16.3.5 Send stable weighing value in standard weighing unit
    • 16.3.6 Send weighing value immediately in standard weighing unit
    • 16.3.7 Send weighing values for all platforms in default weighing unit immediately
    • 16.3.8 Send stable weighing value in current weighing value
    • 16.3.9 Send weighing value immediately in current weighing unit
    • 16.3.10 Start continuous output in standard weighing unit
    • 16.3.11 Stop continuous output in standard weighing unit
    • 16.3.12 Start continuous output in current weighing unit
    • 16.3.13 Stop continuous output in current weighing unit
    • 16.3.14 Set value for “Lower Threshold“
    • 16.3.15 Set value for “Upper Threshold“
    • 16.3.16 Retrieve value for “Lower Threshold“
    • 16.3.17 Retrieve value for “Upper Threshold“
    • 16.3.18 Press simulation “PRINT key“
    • 16.3.19 Send all implemented messages
  • 16.4 Data format
• 9 Weighing
• 10 Parts counting
• 11 Percent determination
• 12 Formulation
• 13 Animal weighing
• 14 Database
• 15 Logs
• 16 Communication
• 17 Servicing, maintenance, disposal
  • 17.1 Cleaning
  • 17.2 Servicing, maintenance
  • 17.3 Disposal
• 18 Troubleshooting guide / error messages
• 19 Appendix A – Variables for printouts
  • 19.1 List of variables
  • 19.2 Format variables
• 20 Appendix B – list “Function Keys“
• 21 Installation display unit / platform
  • 21.1 Technical data
  • 21.2 Weighing system design
  • 21.3 How to connect the platform
  • 21.4 Configure display unit
• 22 Conformity explanation/ test certificate