KERN & SOHN KET-TM - Manual (Page 135)

KEN-TM / KET_TM-BA-e-1420 135
13.4 Dynamic weighing with automatic start
System requirements:
Auto start enabled, see chap. 13.2.2.
For LO threshold < > defined, see chap. 7.1.4.

When using a weighing container,
tare with the help of the TARE key.
 Place load on weighing scale and
dynamic weighing will start
automatically after reaching the LO
threshold.
 The progress bar and the set
average time will be displayed
during dynamic weighing.
 To cancel measurement, press
 The result and the set average time
will be displayed.
 Remove load.
Then the balance is ready for
further measurements.