KERN & SOHN KET-TM - Manual (Page 195)

KEN-TM / KET_TM-BA-e-1420 195
With 4 conductors:
Printed Circuit Board Load cell Remarks
E SHIELD
REF+ - JP1 jumpered
REF- - JP2 jumpered
IN+ OUTPUT +
IN- OUTPUT -
+5V INPUT +
GND INPUT -
+
For connection of individual wires please refer to the load cell’s ID.
+ The connection of several platforms requires the use of A/D transformer
module KERN KET-A01 (optional).
Load cell
shi
el
d
To connect a load cell with 4 conductors
JP1 / JP2 must be jumpered.
[F]