KERN & SOHN KET-TM - Manual (Page 120)

120 KEN-TM / KET_TM-BA-e-1420
 Go to menu and tap <Products> .
 Select component from database
“Product“
 Go to menu and tap < Mass>.
 The alphanumeric input window will
appear.
 Enter nominal weight (such as 470 g) for
component and import by tapping .
 In the menu tap
< Type of deviation>.
 Select desired setting.
Mass Admissible tolerance of
component in gram
Percent Admissible tolerance of
components in percent
 In menu tap
<Lower deviation> / <Upper deviation>.
 The alphanumeric input window will
appear.
 Enter admissible lower / upper tolerance
for component (such as 5 g) and import
by tapping
.
 In menu tap < Platform>
 Assign platform to component.
 For enable < Dispensing>,
see chap. 9.2