7 log out, 8 putting out of service / standby mode – KERN & SOHN KET-TM User Manual
Page 26
26
KEN-TM / KET_TM-BA-e-1420
+
Setting user language
On delivery the display is set to German. For setting additional languages see
Initial Commissioning
In order to obtain exact results with the electronic balances, your balance
must have reached the operating temperature (see warming up time chap.
1).
During this warming up time the weighing system must be connected to
the power supply (mains, accumulator or battery).
To adapt the balance to ambient conditions, open wind screen doors.
The accuracy of the weighing system depends on the local acceleration of
gravity.
Strictly observe hints in chapter Adjustment.
6.7 Log out
Tap logged-on user in the upper bar of the display.
This will bring up the <User> window.
Tap <log out> button
6.8 Putting out of service / Standby mode
Press
and tap desired option.
When selecting
<Stand by> the weighing scale will be ready for operation. It is ready
for operation immediately after start-up without requiring warm-up time.
When selecting
<Off> you will have to restart the weighing scale as described in chap.
6.6 and observe the required warm-up time.