KERN & SOHN KET-TM - Manual (Page 27)

KEN-TM / KET_TM-BA-e-1420 27
6.9 Basic Operation
+ Stabilisation requires a certain warm-up time.
+ For further information on specific setting options for the weighing
application please refer to chap.8.2
6.9.1 Simple weighing
 Check zero display [ ] and set to zero with the help of .
 Place goods to be weighed on balance.
 Wait until the stability display appears ( ).
 Read weighing result.
To save and print the weighing value if an optional printer is connected, press
For data format see chap. 16.4
6.9.2 Zeroing
In order to obtain optimal weighing results, reset to zero the balance before weighing.
Setting to zero requires a range ± 2% max. Values greater than ± 2% max will trigger
the error message “Err2“.

Unload the balance
 Press and zero display as well as indicator will appear.