KERN & SOHN KET-TM - Manual (Page 20)

20 KEN-TM / KET_TM-BA-e-1420
3 Basic instructions
3.1 Proper use
The display unit acquired by you is used in combination with a load cell and serves to
determine the weighing value of material to be weighed. It is not intended for use as
non-automatic weighing system.

Place load manually but carefully on weighing platform.
Prevent loads from dropping.

Place load in centre.

Prevent lateral stress as well as pushing from the side.

As soon as a stable weighing value is reached the weighing value can be
read.